Panasonic KNX · System devices · DIN-rail
Panasonic KNX Power Supply 320/640 mA (PS132 / PS164)


Overview
What it does.
Every KNX line needs a power supply. The PS132 and PS164 are DIN-rail units that feed and monitor the bus voltage, rated at 320 mA and 640 mA, so you can size the supply to the number of devices on each line.
Each unit has a choked KNX bus output and an unchoked 30 V DC auxiliary output, both protected against overload and short circuit, and the range is VDE-certified. Skyline supplies them from Abu Dhabi for villas, towers and fit-outs across the UAE.
Typical applications
- Villa and apartment distribution boards
- Floor-level KNX lines in offices and hotels
- Riser and plant-room panels
- Adding lines to an expanding KNX installation
Key features
- Two versions for bus loads of 320 mA and 640 mA
- Integrated choke output for the KNX bus line plus an unchoked auxiliary output
- Line over-voltage protection on the AC mains input
- Overload and short-circuit protection on both outputs
- Status LED for normal operation and overload
- Compact DIN4 size (4 modules at 18 mm)
- VDE-certified; meets EMC and LVD requirements
Technical data
Specifications.
| Mains voltage | 230 V AC, 50/60 Hz |
|---|---|
| KNX bus output voltage | 28...31 V DC (SELV) |
| Auxiliary (30 V DC) output voltage | 28...31 V DC (SELV) |
| Rated current (bus + 30 V DC) | 320 mA (PS132), 640 mA (PS164) |
| Short-circuit current (bus + 30 V DC) | 700 mA (PS132), 1300 mA (PS164) |
| Overload LED threshold | Output current above 500 mA (PS132) / 900 mA (PS164) |
| Mains failure bridging time | > 100 ms |
| Power consumption (normal) | 13.9 W (PS132), 25.6 W (PS164) |
| Power consumption (max., overload) | 20.4 W at 500 mA (PS132), 35.3 W at 900 mA (PS164) |
| Leakage loss (open-circuited) | 0.85 W |
| Leakage loss (normal) | 3.5 W (PS132), 4.9 W (PS164) |
| Dimensions (H x W x D) | 90 x 71.8 x 65.8 mm |
| Mounting | 35 mm top-hat rail (TH35), 4 modules at 18 mm |
| Protection type | IP20 |
| Overvoltage category | III |
| Pollution degree | 2 |
| Operating temperature | -5 ... +45 C |
| Storage temperature | -10 ... +55 C |
| Ambient humidity | 5...93 % (non-condensing) |
| Weight | 217.3 g |
| Certification | VDE-certified (ISO/IEC 14543-3) |
Ordering
Models & order codes.
Tap “Add to enquiry” to put a model code in the quote form below.
| Model code | Description | Enquire |
|---|---|---|
| WRKT20305NC | KNX Power Supply 320 mA (PS132) | Add to enquiry |
| WRKT20315NC | KNX Power Supply 640 mA (PS164) | Add to enquiry |
FAQ
Common questions.
Should I choose the PS132 or the PS164?
The PS132 is rated 320 mA and the PS164 640 mA for the bus plus the 30 V DC output. Add up the bus current of the devices on the line and pick the version with headroom. Skyline can check this against your device list.
Is there protection and status indication?
Yes. Both outputs are overload and short-circuit protected, the mains input has line over-voltage protection, and a status LED shows normal operation and overload.
How do I get a quote for the KNX power supply?
Send your quantities through the quote form or WhatsApp +971 50 759 8275 and Skyline will confirm availability and quote. We supply projects in all UAE emirates.
Enquire
Need KNX Power Supply (PS132 / PS164)?
Skyline is an authorised Panasonic KNX distributor in the UAE. Send the model codes and quantities and we'll reply with availability and a quote. We can also design, program and install the system.
Request a quote
Tell us what you need. We reply with availability and a quote, usually the same working day.


