Panasonic KNX · System devices · DIN-rail
Panasonic KNX Area/Line Coupler TP (DIN-rail)


Overview
What it does.
A coupler links two KNX TP lines while keeping them electrically separate, which is how larger buildings are split into areas and lines. This two-module DIN-rail unit connects a main line and a sub line.
Depending on the address and parameters you set in ETS it works as an area coupler, a line coupler or a line repeater, and a button lets installers switch filtering off temporarily during commissioning. Skyline supplies and programs it for multi-floor projects in the UAE.
Typical applications
- Splitting a tower or large villa into KNX lines
- Floor-by-floor topology in offices and hotels
- Extending a line with a repeater
- Commissioning and troubleshooting with filtering disabled
Key features
- Connects a main line and a sub line while electrically separating them
- Usable as area coupler, line coupler or line repeater (without filtering), depending on the assigned address and parameters
- Button to temporarily deactivate filtering for commissioning and troubleshooting
- LED indication of operation and filtering status
- KNX-certified (ISO/IEC 14543-3)
Technical data
Specifications.
| Supply voltage | 21 ... 30 V DC (SELV), from the KNX bus |
|---|---|
| Current consumption | < 10 mA (from main line) |
| Dimensions (H x W x D) | 90 x 36 x 71 mm |
| Mounting | 35 mm top-hat rail (TH35), 2 modules at 18 mm |
| Protection type | IP 20 to EN 60529 |
| Safety class | III to IEC 60664-1 |
| Operating temperature | -5 ... +45 C |
| Storage temperature | -10 ... +55 C |
| Weight | 62 g |
Ordering
Models & order codes.
Tap “Add to enquiry” to put a model code in the quote form below.
| Model code | Description | Enquire |
|---|---|---|
| WRKT21015NC | KNX Area/Line Coupler TP | Add to enquiry |
FAQ
Common questions.
Can one device be an area coupler, a line coupler and a repeater?
Yes. The role depends on the physical address and parameters assigned, so the same unit can be used as area coupler, line coupler or line repeater (without filtering).
How is it powered and mounted?
It draws less than 10 mA from the main line and mounts on a 35 mm DIN rail, taking 2 modules (18 mm each). No separate power supply is needed.
How do I get a quote for the KNX area/line coupler?
Send your quantities through the quote form or WhatsApp +971 50 759 8275 and Skyline will confirm availability and quote. We supply projects in all UAE emirates.
Enquire
Need KNX Area/Line Coupler TP?
Skyline is an authorised Panasonic KNX distributor in the UAE. Send the model codes and quantities and we'll reply with availability and a quote. We can also design, program and install the system.
Request a quote
Tell us what you need. We reply with availability and a quote, usually the same working day.


