Panasonic KNX · Actuators · DIN-rail
Panasonic KNX 1-10 V Dimmer Control Unit (4 Gang)


Overview
What it does.
This four-module KNX control unit has four 1-10 V control outputs and relay switching outputs, for lamps whose operating devices use a 1-10 V interface. It handles switching and brightness setting and reports switching state and brightness back to KNX.
Control inputs can be assigned flexibly to switching outputs, for example to drive RGBW lamps, and the relays can be operated manually independent of the bus. Skyline supplies it for lighting projects across the UAE that use 1-10 V drivers.
Typical applications
- Offices and corridors with 1-10 V ballasts
- Retail lighting with scene control
- RGBW and tunable lighting set-ups
- Staircase and timed lighting
Key features
- Switching and brightness setting for lamps with 1-10 V interface operating devices
- Flexible assignment of control inputs to switching outputs, for example to control RGBW lamps
- Operation of the switching outputs as a switching actuator
- Manual switching of the relays, independent of the bus
- Feedback of switching state and brightness value; burn-in function for fluorescent lamps
- Time functions (switch-on/off delay, staircase timer with run-on time) and integration into light scenes
- No additional power supply necessary
Technical data
Specifications.
| Operating voltage | DC 21-32 V (via KNX bus) |
|---|---|
| Output voltage | 1~10 V DC (passive), max. 100 mA per output |
| Current consumption | < 12 mA |
| Power consumption | < 360 mW |
| Mounting | 35 mm DIN rail |
| Mounting width | 72 mm (4 modules) |
| Ambient temperature | -5 ... +45 C |
| Storage temperature | -25 ... +55 C |
Ordering
Models & order codes.
Tap “Add to enquiry” to put a model code in the quote form below.
| Model code | Description | Channels | Enquire |
|---|---|---|---|
| WRKT5144J5NC / WRKT5154J5NC | KNX Secure 1-10 V Dimmer Control Unit 4 gang (GV) | 4 | Add to enquiry |
FAQ
Common questions.
What does it control?
Lamps with 1-10 V operating devices: four 1-10 V outputs (passive, max. 100 mA each) plus relay switching of the connected supply.
How is it powered?
From the KNX bus (21 to 32 V DC), so no additional power supply is necessary.
How do I get a quote for the KNX 1-10 V dimmer control unit?
Send your quantities through the quote form or WhatsApp +971 50 759 8275 and Skyline will confirm availability and quote. We supply projects in all UAE emirates.
Enquire
Need KNX 1-10 V Dimmer Control Unit (4 gang)?
Skyline is an authorised Panasonic KNX distributor in the UAE. Send the model codes and quantities and we'll reply with availability and a quote. We can also design, program and install the system.
Request a quote
Tell us what you need. We reply with availability and a quote, usually the same working day.


