Panasonic KNX · Actuators · DIN-rail
Panasonic KNX Mix Actuator MX2 - 8 to 24 Channel, 16 A (MX208 / MX212 / MX216 / MX220 / MX224)


Overview
What it does.
The MX2 mix actuator puts lighting switching, heating, AC and DC shutter/blind control and 2-pipe or 4-pipe fan coil control in one DIN-rail device. It comes in 8, 12, 16, 20 and 24 channel versions with 16 A relay outputs.
It is powered from the KNX bus with no auxiliary supply, and version 2.0 adds 24 auxiliary functions such as scene actuator, logic gate and staircase controller. Skyline supplies and programs MX2 actuators for villas, apartments and hotel projects across the UAE.
Typical applications
- Whole-villa lighting and blind control from one board
- Hotel room and apartment distribution boards
- Fan coil control for split-room HVAC
- Heating valves and electric consumers
Key features
- Versions with 8, 12, 16, 20 or 24 relays
- Switching of lighting loads and electric consumers, and switching of heating products or valves
- Drives AC and DC shutter/blind motors
- Controls 2-pipe and 4-pipe fan coils with up to 6 fan levels
- Powered via the KNX bus; no additional auxiliary voltage supply required
- 24 auxiliary functions (v2.0); each can be set to one of 14 types, such as sequencer, counter, scene actuator, filter, converter, logic gate, presence detector controller and staircase controller
Technical data
Specifications.
| Interface / mode | KNX TP1, S-Mode |
|---|---|
| Bus voltage / operating voltage | 21 - 32 V DC SELV, from the KNX bus |
| Bus current consumption | < 5 mA without switching, < 12 mA when switching |
| Switching - lighting outputs (MX208 / 212 / 216 / 220 / 224) | Up to 8 / 12 / 16 / 20 / 24 |
| Switching - heating outputs | Up to 8 / 12 / 16 / 20 / 24 |
| Shutter/blind AC motors | Up to 4 / 6 / 8 / 10 / 12 |
| Shutter/blind DC motors | Up to 2 / 3 / 4 / 5 / 6 |
| Fan coil 2-pipe (one fan level controlled) | Up to 4 / 6 / 8 / 10 / 12 |
| Fan coil 4-pipe (one fan level controlled) | Up to 2 / 4 / 5 / 6 / 8 |
| Auxiliary functions (v2.0) | 24 on every version |
| Switching nominal voltage | 230 V AC, 50/60 Hz |
| Switching nominal current (at 230 V AC) | 16 A (PF=1) |
| Output contact type | Potential-free closing contacts |
| DC switching capacity (resistive) | 5 A at 30 V DC |
| Resistive load | 3680 W |
| Inductive load (shutter) | 600 W |
| Incandescent / halogen load | 1200 W |
| Max. inrush current | 100 A |
| Overall load current of neighbouring outputs | Sum of C1..C8 max. 80 A (MX208); C1..C12 120 A (MX212); C1..C16 160 A (MX216); C1..C20 200 A (MX220); C1..C24 240 A (MX224) |
| Mounting | DIN rail (35 mm top-hat rail TH35) |
| Mounting width | 144 mm / 8 modules (8 and 12 channels); 252 mm / 14 modules (16, 20 and 24 channels) |
| Weight | 320 g (8 ch), 370 g (12 ch), 575 g (16 ch), 625 g (20 ch), 675 g (24 ch) |
| Bus connection | KNX bus terminal (243-211 Wago) |
| Load terminals | Screw terminals; single wire 1.5 to 4 mm2 or 2 x 1.5 to 2 x 2.5 mm2 |
| Protection type (IEC 60529) | IP 20 |
| Protection class (IEC 61140) | II |
| Pollution degree (IEC 60664) | 2 |
| Standards | EN 60669-2-1, EN 50428, EN 50090 (KNX) |
| Ambient temperature | -5 ... +45 C |
| Storage temperature | -10 ... +55 C |
| Transportation temperature | -25 ... +70 C |
| Ambient humidity | 5...93 % (non-condensing) |
Ordering
Models & order codes.
Tap “Add to enquiry” to put a model code in the quote form below.
| Model code | Description | Channels | Enquire |
|---|---|---|---|
| WRKT4708J5NC | KNX Mix Actuator MX208 - 8 channels, 16 A | 8 | Add to enquiry |
| WRKT4712J5NC | KNX Mix Actuator MX212 - 12 channels, 16 A | 12 | Add to enquiry |
| WRKT4716Q5NC | KNX Mix Actuator MX216 - 16 channels, 16 A | 16 | Add to enquiry |
| WRKT4720Q5NC | KNX Mix Actuator MX220 - 20 channels, 16 A | 20 | Add to enquiry |
| WRKT4724Q5NC | KNX Mix Actuator MX224 - 24 channels, 16 A | 24 | Add to enquiry |
FAQ
Common questions.
How many channels do I need?
Count lighting circuits, blind motors (see the per-version motor limits in the specifications) and fan coils, then pick 8, 12, 16, 20 or 24. Skyline can size this from your schedule of loads.
Does it need an auxiliary power supply?
No. It is powered via the KNX bus. The outputs are potential-free closing contacts rated 16 A at 230 V AC.
How do I get a quote for the KNX MX2 actuator?
Send your quantities through the quote form or WhatsApp +971 50 759 8275 and Skyline will confirm availability and quote. We supply projects in all UAE emirates.
Enquire
Need KNX Mix Actuator MX2 (8 to 24 channel, 16 A)?
Skyline is an authorised Panasonic KNX distributor in the UAE. Send the model codes and quantities and we'll reply with availability and a quote. We can also design, program and install the system.
Request a quote
Tell us what you need. We reply with availability and a quote, usually the same working day.


