Panasonic KNX · Sensors & detectors · Corridor
Panasonic KNX Corridor Type Presence Detector


Overview
What it does.
This KNX presence detector has a lens optimised for long, narrow spaces such as corridors, hotel floors and lobbies. It controls lighting from motion and brightness and is available in surface-mount and flush-mount versions.
Detection range reaches 40 m by 5 m (tangential) at a 2.5 m mounting height. It offers AUTO and SEMI-AUTO modes, two push-button inputs and slave connection for extended coverage. Skyline supplies it for UAE hotels, offices and residential towers.
Typical applications
- Hotel corridors and lobbies
- Residential tower floor corridors
- Office corridors
- Car-park walkways and service areas
Key features
- Lens design optimised for long corridors
- Lighting control based on motion and brightness; AUTO and SEMI-AUTO modes
- Two inputs for separate push buttons (lighting on/off or dimming)
- Red LED for motion detection feedback
- Slave detector connection for extended coverage; lens shield to mask unwanted zones
- Easy configuration via ETS (ETS 5 or higher)
Technical data
Specifications.
| Rated voltage | 24 V DC (via KNX bus) |
|---|---|
| Current draw | Approx. 10 mA |
| Detection angle | 180 - 360 degrees (with corridor lens) |
| Detection range (tangential) | 40 m x 5 m (L x W) at 2.5 m height, 20 C |
| Detection range (radial) | 16 m x 3 m (L x W) at 2.5 m height, 20 C |
| Lux setting (Lux 1 and 2) | 10 - 2000 lux |
| Time setting (Time 1 and 2) | 30 sec - 60 min |
| Standby level (Level 1 and 2) | 10% - 60% |
| Rated protection | IP20 |
| Operating temperature | -20 C ~ +45 C |
Ordering
Models & order codes.
Tap “Add to enquiry” to put a model code in the quote form below.
| Model code | Description | Enquire |
|---|---|---|
| WRKT32105NC | KNX Corridor Type Detector - surface mounted | Add to enquiry |
| WRKT32205NC | KNX Corridor Type Detector - flush mounted | Add to enquiry |
FAQ
Common questions.
How far does it detect?
Up to 40 m x 5 m (tangential) or 16 m x 3 m (radial) at 2.5 m mounting height and 20 C, per the specifications.
Can coverage be extended?
Yes. Slave detectors can be connected for extended coverage, and a lens shield masks unwanted zones.
How do I get a quote for the KNX corridor presence detector?
Send your quantities through the quote form or WhatsApp +971 50 759 8275 and Skyline will confirm availability and quote. We supply projects in all UAE emirates.
Enquire
Need KNX Corridor Type Presence Detector?
Skyline is an authorised Panasonic KNX distributor in the UAE. Send the model codes and quantities and we'll reply with availability and a quote. We can also design, program and install the system.
Request a quote
Tell us what you need. We reply with availability and a quote, usually the same working day.


